Mapei UC Leveller

UC Leveller is used for levelling and smoothing of new or existing substrates in preparation for receiving any type of textile flooring. Particularly suited to areas where resistance to heavy loads and traffic is needed plus the requirement for a smooth surface. This is a fast hardening levelling smoothing compound for thicknesses from 3 mm to 15 mm, especially recommended for pumping.

Sizes: 20kg bags

Mapei Ultratop

Mapei Ultratop is a self-levelling, self-drying topping compound based on High-Hydrated Cement Technology (HCT™) that is specifically formulated for fast-track resurfacing of interior horizontal wear surfaces. Suitable for the following applications retail stores, mall corridors and entrances, showroom floors, restaurant floors, hotel lobbies and loft apartments. Ideal for industrial warehouse floors and loading docks subject to continual vehicular and foot traffic and situations where a unique, creative floor is desired.

Sizes: 25kg bags

Mapei Ultraplan Eco

Mapei Ultraplan Eco is used for levelling and removing difference in thickness from 1 to 10mm on new and existing substrates in preparation for any type of floor laying. Provides excellent resistance to any areas subjected to heavy loads and traffic. Ultraplan Eco is particularly suitable for areas subject to wheel chairs. Ultraplan Eco has ultra quick hardening properties and submits very low volatile organic compounds (VOC).

For interior use only

Sizes: 23kg bags

Mapei Ultraplan Maxi

Mapei Ultraplan Maxi is used for interior floor levelling, smoothing different thicknesses from 3 to 30 mm on new or existing substrates preparing them to receive all kinds of flooring where high resistance to loads and traffic is required. Mapei Ultraplan Maxi is especially suitable for areas subject to wheeled service loads such as chairs and trolleys and for use with underfloor heating/cooling systems.  Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres.

For interior use only

Sizes: 25kg

Mapei Fibreplan

Fibre plan is used for interior levelling smoothing and removing differences in thickness from 3 to 10 mm on properly fixed timber substrate and wooden boards where good resistance to loads and traffic is required. Fibreplan is suitable for wheeled chair traffic and for underfloor heating systems.

For interior use only

Sizes: 25kg bags

Mapefloor I 300 SL

Mapefloor I 300 SL is a two-component epoxy formulate with high solid content used to create self-levelling or multi-layered resin coatings with an attractive smooth or non-slip surface. A multipurpose neutral coloured epoxy formulate for industrial floor coatings up to 4 mm thick in compliance with the standards currently applied in the food sector.

Size: 8kg kit

Mapecolor Paste

Mapecolour paste is a coloured paste which may be added to neutral epoxy formations such as Primer SN, Mapefloor I 300 SL, Mapefloor I 500 W, Mapecoat 620 W  and Mapecoat I 24  to add colour to Mapei floor systems. Mapecolor Paste is available in 19 standard a RAL colours to satisfy all finishing requirements.

Sizes: 0.7kg

Mapei Primer SN

Mapei Primer SN is a two-component, epoxy primer specifically designed to enhance adhesion of multi-layer flooring systems, such as MAPEI’s Mapefloor™ polyurethane and epoxy deck and flooring systems, as well as a primer for cement screeds and epoxy mortars. It is typically applied on concrete surfaces, such as floor slabs in institutional buildings, storage and logistical areas, parking garages, balconies and walkways. Low in VOCs and viscosity, Primer SN penetrates well for an excellent mechanical and chemical bond both with the substrate and with coatings that are subsequently applied to the primer coating.

Sizes: 20kg kit

Mapei Primer G

Mapei Primer G is a water dispersion of special synthetic resins which, once applied to any surface, dry to form a flexible, compact, shiny coating which consolidates the surface, where needed. Primer G also improves the adhesion of smoothing compounds, paint, adhesive for wall paper, adhesive for tiles and mortar for renders. The film of Primer G on the surface of gypsum or cement, prevents any chemical reaction between sulphates and the cement aluminates of the tile adhesives which, in the presence of moisture leads to the formation of the salt “ettringite’’ which is the cause of tiles breaking away from gypsum substrates.

Sizes:1kg

Mapei Eco Prim T

All-purpose primer for interiors to improve adhesion of levelling compounds on all absorbent and non-absorbent surfaces. Eco Prim T is a solvent-free, easily applied acrylic resin-based primer in water dispersion. It has excellent bonding, flexibility, water and ageing resistant characteristics. Eco Prim T is an easily applied, ready to use white coloured liquid. It is applied by brush or roller.

Sizes: 5kg

Mapei Planitop Fast 330

Mapei Planitop Fast 330 is a quick setting fibre reinforced mortar for internal and external walls and floors. This product can be applied at thickness 3mm to 30mm to smooth irregular surfaces quickly making them suitable for laying Ceramic and Stone tiles or for waterproofing with a liquid membrane or flexible cementitious system.

Sizes: 25kg