Liberon Exterior Wood Protector
- Protects vertical and horizontal exterior wood from weathering
- Contains UV filters to help prevent fading from sunlight
- Long lasting protection
- Quick drying, non-drip formula
- Resistant to extreme temperatures -10°C - +35°C
- Clear finish
HOW TO USE
Preparation
Ensure the surface is clean, dry and free from previous finishes and dust. Lightly sand new wood and clean old wood with Tough Deck Clean and Revive or Garden Furniture Cleaner for Wood. When treating hardwoods, it is recommended to leave the wood exposed for up to 12 months before applying this product. This allows the grain in the wood to open and breathe and aids adhesion of the product.
Application
Stir very well before use to disperse all the ingredients in the tin. Ensure the weather conditions will be dry for 24 hours before application. Apply a generous, but not too thick, coat of exterior wood protector with a paint brush or roller. Allow to dry for two hours then apply a second coat. A third coat may be necessary on highly porous timbers. Any unabsorbed product remaining on the surface should be evened out with a brush to avoid unsightly marks. Leave to dry for at least 24 hours before use.
Cleaning and maintenance
For general maintenance clean with water. We recommend applying a further coat of Exterior Wood Protector in heavy usage areas as and when required.
Precautions
Wear suitable clothing and protective gloves.
Store Exterior Wood Protector at a temperature above 5°C. Always replace the lid otherwise the product can deteriorate.
May not be suitable for some foreign hardwoods, test first on an inconspicuous area.
On exterior oak we recommend the use of Pure Tung Oil.
UNIT SIZE:
1L, 2.5L, 5L
COVERAGE:
10-12m²
LOCATION:
Exterior
DRYING TIME:
2 hours between coats, 24 hours final
APPLICATION:
Brush or roller
TOOL CLEANING:
Water